TheMega Grow 1000 l/d reverse osmosis filter is a filter that allows you to eliminate sediments that dissolve in the water, both pesticides and chlorine. Promotes its purity to water plants.
Eliminates 99% of chlorine and reduces sediments greater than 5 microns. Eliminates up to 95% of dissolved salts, heavy metals and other possible contaminants
Benefits of Mega Grow
Reverse Osmosis Equipment is designed to minimize wear of water to the drain, with a ratio of approximately 2:1 (bad water/good water).
- Eliminates up to 95% of the salts in the water
- Less water waste than other equipment
- Easy installation indoors and outdoors
- Automatic start and stop function
Helps stabilize the pH, achieve 100% effectiveness of nutrients and fertilizers, and protect organisms.
Ideal for organic crops.
Eliminates or Reduces: Salts, Heavy Metals, Chloramines , Nitrates, Nitrites, Chlorine, Sediments, Earth, Oxides, Herbicides and Pesticides, Volatile Organic Contaminants (Chemical Contaminants, Bezene, Oils, Trialomethanes, Detergents, PCB's)
How many liters per hour are filtered with the Mega Grow 1000?
The Mega Grow offers 40 liters per hour, which means 1,000 liters per day. It is practically distilled water that allows plants to more easily absorb nutrients and generate better production.
Suitable conditions for using the mega grow 1000
To guarantee optimal operation of this Growmax Water osmosis filter must have a water pressure of 4BAR. It is interesting to have a pressure pump.
Water conditions
- Temperature 25ºC
- Pressure: Min. 3 Kg Max. 6 Kg
- Quality (500 tds or ppm)
Other conditions can reduce water production.
Filter changes should be done every approximately every 4-6 months or every 8,000 liters of osmosis water
Ref#422111 and its spare parts to add to any reverse osmosis equipment when it is required to obtain ultra-pure water of 000 ppm.
Use with a Pump Kit
To get the most out of osmosis, it is recommended to use a Pump Kit, so that the pressure is maintained and you get the performance indicated by the manufacturer. These kits must be placed at the osmosis water inlet.
Ref#422120
To have better performance you can also use a Buoy Kit, so that it sends a signal to the pump when it should stop working when the water reaches a certain level. In this way spills or excessive watering are avoided.
Ref#422114
Spare parts
- 2 units of Ref#422102
- 2 units of Ref#422106